Look at page 38 from the latest Victoria British catalog. I appears that there should be 6 pads, two at the rear over the rear axles, and another set a at the heel board mounts, and a last pair where the seat belts are attached.
Dan Parrott Savannah, Ga 1980 Triumph Spitfire "PJ" 1972/1978 Spit Six Project car "Joseph" -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Larry Vaughan Sent: Wednesday, September 30, 2009 10:32 PM To: [email protected] Subject: [Spits] Mount body I am about ready to set my '73 Spitfire body back on the refurbished frame. When I seperated the two, I was confidant I would remember where the two 1/4 inch thick aluminum spacers went. I don't remember. They went on the front outboard body bolts, at the firewall, or the ones directly above the rear axle. Can anyone refresh my memory? The body mounting kit I bought didn't have the spacers. Larry [email protected] http://autox.team.net/mailman/listinfo/spitfires http://www.team.net/archive _______________________________________________ Support Team.Net http://www.team.net/donate.html You are subscribed as [email protected] [email protected] http://autox.team.net/mailman/listinfo/spitfires http://www.team.net/archive
