That first photo was a little misleading. It was taken Saturday after I let the car down from the jacks. So it was probably sitting a little high. After I went for a ride Sunday afternoon it came down some like I said in my first e-mail. I will try and get new picture. It still does have a little negative camber. I checked my Haynes manual and it said the rear should be 0 to 2 degree negative camber. Is this correct and how do you measure that?
Also I'm thinking about doing what Joe said about letting the car down with everything loose and then tighten the bolts. I don't have a lift which could make it a little difficult. The spacers have a nipple that fits in dimple on the leaf. Hopefully that will hold them in there just like the rubber ones. Does anybody know how thick the original rubber spacers were? Thanks all for your input Greg 1978 Spitfire 1500 _______________________________________________ Support Team.Net http://www.team.net/donate.html You are subscribed as [email protected] [email protected] http://autox.team.net/mailman/listinfo/spitfires http://www.team.net/archive
