:I purchase a couple of rolls of this material from JC Whitney. I
stopped at their facility when I was traveling across Illinois going
West (not much to see).
Anyway they had a few widths of the material.
I would go to their website and phone into someone that can help. Their
website does not seem to be all inclusive of what they have on hand.
Good Luck
Glenn Franco TR6's, 250 and Spit racer
Today's Topics:
1. edge trim source (Paul Meyer)
----------------------------------------------------------------------
Message: 1
Date: Thu, 6 May 2010 12:17:54 -0400
From: Paul Meyer <[email protected]>
Subject: [Spits] edge trim source
To: <[email protected]>
Message-ID: <[email protected]>
Content-Type: text/plain; charset="us-ascii"
Listers,
I'm looking for a source to buy replacement edge trim.
In several locations around the interior of the car, there's a egde trim
installed. It's black vinyl with a metal core - it's used primarily to cover
unfinished edges of sheet metal, notably along the back edge of the car, where
the interior and exterior sheet metal join. I tried Moss and VB, but couldn't
find it.
Paul F. Meyer Home Phone: 781-551-8574 Cell Phone: 781-801-3170 e-mail:
[email protected]
_______________________________________________
[email protected]
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/spitfires/[email protected]
