Hi John,

If you are talking about the chrome strip at the top edge next to the window, that is the inner waist seal that is a separate part. Spit Bits part # Item #: 612806
.
The finisher trim pads go on first, then the waist seals are held in place with clips that slide up from the bottom. It is hard to do with the windows in place, though I have done it. You need to either make a tool out of thin metal - I used the strips that cover the slots for computer cards or get a tool. A couple of places sell it now Rimmer Brothers for one They call it Weatherstrip Clip Fitting Tool part RX1562. Plan on dropping several of the clips into the dark recesses of the doors.

Paul Tegler(I hope that is the correct name) has a wonderful site for Spitfire Info. http://www.teglerizer.com/triumphstuff/sccaplaques.htm has details about the plaques. There used to be some one on the list (Ithink) that was making and selling them. I did find this site that sells them http://www.collectibles-articles.com/antique/SCCA-Dash-Plaque-Rare-1978-and-later-Triumph-Spitfire_270504695246.html I know nothing about them,

If I were putting one on my dash I think I would use thin double sided tape.


Roger Elliott




[email protected] wrote:
Hello - I am replacing the door panels in my 78 Spitfire - that seems to be
straightforward.  I am also replacing the door finisher trim pads that go on
top - can't quite figure that out.  In what I am replacing, there is a small
chrome strip, but no strip on the replacement pads. - how does this all go
together and how is it all attached?  Also, what do I use to put the dash
plaque back on my refinsished dashboard, glue?  Should the 78 have dates that
go up to 73, or all the way to 78?  And finally, where can I find a
replacement dash plaque?

John -
78 Spitfire
_______________________________________________

[email protected]
Donate: http://www.team.net/donate.html
Suggested annual donation  $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: 
http://autox.team.net/mailman/options/spitfires/[email protected]

Reply via email to