Hi Jim, even here in the UK it's difficult to find floor pans of the correct/original pressings, unless you're lucky enough to find one at an autojumble or someone with some NOS panels. The repro panels generally need some - or lots - of fettling/adapting to get them to work well.
Fingers crossed you can find someone with some old stock panels. Suzie Sent from my BlackBerry. wireless device -----Original Message----- From: Mercedes Benz <[email protected]> Sender: [email protected]: Sun, 8 Apr 2012 17:19:55 To: <[email protected]> Subject: [Spits] GT6 MKI Front Floor Pans Hi Guys, I've been on the list for years and it has been very informative. I need the lists help in locating both right and left replacement floor pans for a retoration on a 1968 GT6 MKI. The ones curantly available from the usual sources do not have the contures needed to fit the trans tunnel as well as the flange to bolt the tunnel cover to. Any help would be appreciated. Thanks in Advance, Jim. _______________________________________________ [email protected] Donate: http://www.team.net/donate.html Suggested annual donation $11.47 Archive: http://www.team.net/archive Forums: http://www.team.net/forums Unsubscribe/Manage: http://autox.team.net/mailman/options/spitfires/[email protected] _______________________________________________ [email protected] Donate: http://www.team.net/donate.html Suggested annual donation $11.47 Archive: http://www.team.net/archive Forums: http://www.team.net/forums Unsubscribe/Manage: http://autox.team.net/mailman/options/spitfires/[email protected]
