Doug, I'm no expert but will speak from the experience of having successfully installed one windshield. IMO, you should not need to use additional sealant. If you are installing the chrome (or plastic) trim strips, I understand you are far better to install them before installing the windshield. I used the "rope trick" to pull the edge of the seal/gasket into the cabin. One thing I would do differently is to feed the rope such that the join is at the top, rather than the bottom of the windshield, as the last 4 inches of seal was not pulled in by the rope, and it would have been easier to access the gasket had it been at the top of the windshield. Good luck, your Spit looks fantastic!
Nick Moseley __________ Information from ESET Smart Security, version of virus signature database 7643 (20121030) __________ The message was checked by ESET Smart Security. http://www.eset.com _______________________________________________ [email protected] Donate: http://www.team.net/donate.html Suggested annual donation $11.47 Archive: http://www.team.net/archive Forums: http://www.team.net/forums Unsubscribe/Manage: http://autox.team.net/mailman/options/spitfires/[email protected]
