That is a great website, "Paul Geitner's Spitfire" --- a treasure of information for new spit owners -- thanks so much. Please note though, the piston spec. table under "Torque and Power" specifies a 9.0:1 c. ratio for flat top cylinders for the fed. 1976 Spits such I have with a CKT2648 head
Sent from my iPad On Sep 1, 2013, at 3:34 PM, Comcast-spitfirecars <[email protected]> wrote: > Indeed! That works with flat tops in a 1500 to give you 9:1. Much easier to get a TKC3239 and shave it than find a TKC2748 or TKC1155. TKC 1409 and 1410 have air injection ports in the exhausts but they are simple to plug. I like using TKC3239 or 218139 or 218143 heads and shaving appropriately. Moreover, if you want even higher CR, then just shave the head some more. Note that 9.5:1 to 10:1 is about the limit on a Spitfire engine with ordinary, open-loop ignition (i.e, no knock-sensing with dynamic retard) and pump gasoline and a moderate cam (less than 280 degrees overlap) to avoid pre-detonation. > > Here's some more info here, including a CR head shaving calculator and some info about various heads: > > http://auskellian.com/paul/links_files/performance_enhancements.htm > > Good luck and enjoy your Spitfire > > Paul > > Sent from my iPhone > > On Sep 1, 2013, at 3:17 PM, Hans <[email protected]> wrote: > >> >> Hmmm, why not shave the existing head 0.050"? >> >> >> Sent from my iPad >> >> On Aug 31, 2013, at 12:17 PM, Comcast-spitfirecars <[email protected]> wrote: >> >>> Nope that is incorrect. Also, 1300 engines always had flat tops. Variation in factory 1300 CR comes from different heads >>> >>> Flat top pistons alone take a 7.5:1 1500 to 8.4:1. To get 9:1 you also need a smaller head chamber, which you get with the TKC1155 (European market) or TKC2748 (North American market 1976 model Spitfire) heads, which are shaved about 0.050" thinner than other 1500 heads (like the TKC 3239, 1409 and 1410). >>> >>> If you want more detailed actual data and measurements, then I have it--let me know if you want some and I'll forward it You could also try taking several engines apart and making your own measurements or talk to someone else who also has direct experience (e.g., Ted Schumacher, Kas Kastner) >>> >>> Sent from my iPhone >>> >>> On Aug 29, 2013, at 5:56 PM, Hans <[email protected]> wrote: >>> >>>> According to Moss, their pistons raise the ratio to 9:1 for the 1500 . 8.4:1 is for the Spit 1300, I think. >>>> . >>>> >>>> Sent from my iPad >>>> >>>> On Aug 28, 2013, at 4:28 AM, Comcast-spitfirecars <[email protected]> wrote: >>>> >>>>> Just a friendly note to say that you are not going to get anywhere near an additional 20hp just by switching from dished to flat top pistons alone, which only raises CR from 7.5:1 to 8.4:1. >>>>> >>>>> Should be fine wrt NOx >>>>> >>>>> Sent from my iPhone >>>>> >>>>> On Aug 26, 2013, at 2:00 PM, [email protected] wrote: >>>>> >>>>>> Send Spitfires mailing list submissions to >>>>>> [email protected] >>>>>> >>>>>> To subscribe or unsubscribe via the World Wide Web, visit >>>>>> http://autox.team.net/mailman/listinfo/spitfires >>>>>> or, via email, send a message with subject or body 'help' to >>>>>> [email protected] >>>>>> >>>>>> You can reach the person managing the list at >>>>>> [email protected] >>>>>> >>>>>> When replying, please edit your Subject line so it is more specific >>>>>> than "Re: Contents of Spitfires digest..." >>>>>> >>>>>> >>>>>> Today's Topics: >>>>>> >>>>>> 1. High compression pistons and smog test (Hans) >>>>>> >>>>>> >>>>>> ---------------------------------------------------------------------- >>>>>> >>>>>> Message: 1 >>>>>> Date: Sun, 25 Aug 2013 17:14:21 -0700 >>>>>> From: Hans <[email protected]> >>>>>> To: [email protected] >>>>>> Subject: [Spits] High compression pistons and smog test >>>>>> Message-ID: <[email protected]> >>>>>> Content-Type: text/plain; charset=us-ascii >>>>>> >>>>>> I am rebuilding my California 1976 spitfire's engine and considering using >>>>>> Moss's HC flat top pistons instead of the LC (dished) ones. I have been told >>>>>> that I risk failing the NOx smog test max requirement. I understand that this >>>>>> is due to the combustion chamber's temperature potentially exceeding 2500 >>>>>> degrees , which generates NOx. Assuming the EGR to function perfectly and the >>>>>> fuel mixture to a bit rich, is this still potentially a high risk problem? >>>>>> There must be a few a guys out there that have been tempted to do this to get >>>>>> the nearly 20 extra hp. That is so badly needed. >>>>>> >>>>>> >>>>>> ------------------------------ >>>>>> >>>>>> _______________________________________________ >>>>>> Spitfires mailing list >>>>>> [email protected] >>>>>> http://autox.team.net/mailman/listinfo/spitfires >>>>>> >>>>>> >>>>>> End of Spitfires Digest, Vol 7, Issue 48 >>>>>> **************************************** _______________________________________________ [email protected] Donate: http://www.team.net/donate.html Suggested annual donation $11.47 Archive: http://www.team.net/archive Forums: http://www.team.net/forums Unsubscribe/Manage: http://autox.team.net/mailman/options/spitfires/[email protected]
