Is the "tipping valve" at the rear of the M/C properly put together? This is open when the pedal is up, to allow the reservoir to communicate with the cylinder, and it closes as soon as you press the pedal, so that pressure can build up in the cylinder.
Normally, a bad seal anywhere will allow fluid to leak out onto the ground (or your foot!), but a bad tipping valve will allow the fluid to leak back into the reservoir. In any case, make sure you check EVERYWHERE for a leak! Is fluid being used up as you try to use the brakes? Doug On Mon, Jun 30, 2014 at 2:32 PM, Dennis Reese <[email protected]> wrote: > Consensus seems to be that I need to continue bleeding. So I did -- no > air bubbles, same result. While I hate the thought of starting over the > only thing that isn't new is the master. Does that sound reasonable? _______________________________________________ [email protected] Donate: http://www.team.net/donate.html Suggested annual donation $11.47 Archive: http://www.team.net/archive Forums: http://www.team.net/forums Unsubscribe/Manage: http://autox.team.net/mailman/options/spitfires/[email protected]
