On a 73 I believe it is a wire in the wiring harness. There is no separate resistor. My 74 is that way as well. When I did my Pertronix I just ran the 2 wires to the 2 terminals on the coil. It's been running fine for about 12 years.
BillG #133 -----Original Message----- From: Spitfires [mailto:[email protected]] On Behalf Of Doug Mitchell Sent: Friday, September 19, 2014 11:12 AM To: Spitfires Subject: Re: [Spits] Electronic Ignition Last week, I inquired about which electronic ignition to use. I purchased a Pertronix, and started to install it yesterday. This is on a 73, US spec 1500. Can someone please tell me the physical location of the ballast resistor? Thanks, Doug [email protected] _______________________________________________ [email protected] Donate: http://www.team.net/donate.html Suggested annual donation $11.47 Archive: http://www.team.net/archive Forums: http://www.team.net/forums Unsubscribe/Manage: http://autox.team.net/mailman/options/spitfires/[email protected] _______________________________________________ [email protected] Donate: http://www.team.net/donate.html Suggested annual donation $11.47 Archive: http://www.team.net/archive Forums: http://www.team.net/forums Unsubscribe/Manage: http://autox.team.net/mailman/options/spitfires/[email protected]
