Is the GT6 OD shift lever different than the Spitfire OD lever? Doug
On Mon, Oct 14, 2019, 2:35 PM v6spitfireguy v6spitfireguy < [email protected]> wrote: > Since the GT6 overdrive gear shift lever for the knob mounted switch (part > number 155301) is made of unobtiainum and finding hens teeth is easier than > locating a used one, I would like to machine another, correct one for my > GT6. Originally when I machined the one in my car now, I didn’t have a > GT6 lever only a Spitfire Non OD lever, and I patterned it after that. > However they are a bit longer than the GT6 overdrive ones and I haven’t > been able to find a correct lever or even one in a car to measure it. So > if anyone has a GT6 with overdrive, and could give me a measurement I can > extrapolate the rest. The current OD lever I made, when shifted into first > gear measures 10 inches from the top rear of the tunnel to the highest part > of the shift knob cap (the one with the switch in it). If I could get a > similar measurement from a GT6 with the original OD lever in it, I can > guesstimate the rest. I don't want the column mounted switch, I LIKE the > lever mounted one, but I would like it to be the correct length. > > Of course, I would prefer to just purchase one if reasonable... > > > Barry Schwartz > _______________________________________________ > > [email protected] > Donate: http://www.team.net/donate.html > Suggested annual donation $11.47 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > Unsubscribe/Manage: > http://autox.team.net/mailman/options/spitfires/[email protected] >
_______________________________________________ [email protected] Donate: http://www.team.net/donate.html Suggested annual donation $11.47 Archive: http://www.team.net/archive Forums: http://www.team.net/forums Unsubscribe/Manage: http://autox.team.net/mailman/options/spitfires/[email protected]
