I had the same problem but i have a 1998 SC2. I took it to the dealership to have them see what it was and the tech said when I got the throttle body they bored it out but didnt replace big enough plates. So when the car was just idling it was receiving too much air causing the engine to idle too high and throwing the code out. If you got your TB from XRC and your car idles higher than usual than that is most likely your problem. The tech suggestest I replace it with a new one and I just let it go. A few days later the light stopped coming on and the computer, i guess taught itself about the increased airflow at idle. Bryan Campbell
--- [EMAIL PROTECTED] wrote: > recently got my 55 mm TB on, and my SES on my 92 SC > came on too. to throttle > bodies cause this? it didnt blink, just came on, > then shut off. comes on > and off as it pleases, so it seems. my bro has a > scanner, but till i get a > chance to use it, does anyone have any ideas? > ~Reece > __________________________________________________ Do You Yahoo!? Yahoo! Health - your guide to health and wellness http://health.yahoo.com Visit SPOC National at http://www.spocnational.org Don't forget to update your Profile in the Owners Database. To unsubscribe from the list at any time, send an e-mail to [EMAIL PROTECTED] with any subject, and in the message text, "Unsubscribe spoc".
