If you use a properly sized Grade 8 bolt, you should not have any problems with these units.
I have been working on a similar design for months that utilizes a urethane insert. I commend Twistec for getting them out to the public quickly. I would also imagine that the vibration caused by using a urethane mount is going to be worse than using window weld, but if you are into performance, this really shouldn't matter. Try using all solid mounts like I have in my ride and you will forget about vibration after some time. Scott W. Thomas [EMAIL PROTECTED] > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On > Behalf Of Jeff Colwander > Sent: Thursday, May 02, 2002 9:16 AM > To: [EMAIL PROTECTED] > Subject: Re: [[SPOC] New polyurethane dog bone motor mounts] > > Very nice. That will save me the trouble of finding out if the Cavalier > dogbones are the same size (they've had similar parts for 2+ years). But > you > might want to keep a few extra bolts around with these. The bolts that > hold > these on were spec'ed for the stock dog bones which took much of the > abuse. > Without the rubber there to cushion them, the bolts see a LOT more force. > I've gone through a set of bolts every 1.5 years or so. These will spread > the > force over a larger area than what I have, so it may not be an issue. > > Something else to put on my list from them... > > Jeff > > [EMAIL PROTECTED] wrote: > > TWiSTEC now has polyurethane dog bone for $90/pair. > > > > For a picture of what they look like check out > > <A > HREF="http://www.twistecproducts.com/products/dogbone.jpg";>http://www.tw is > tecproducts.com/products/dogbone.jpg</A> > > > > -Patrick > > > > > > > > > Visit SPOC National at http://www.spocnational.org > > Don't forget to update your Profile in the Owners Database. > > To unsubscribe from the list at any time, send an e-mail to spoc- > [EMAIL PROTECTED] with any subject, and in the message text, > "Unsubscribe spoc". Visit SPOC National at http://www.spocnational.org Don't forget to update your Profile in the Owners Database. To unsubscribe from the list at any time, send an e-mail to [EMAIL PROTECTED] with any subject, and in the message text, "Unsubscribe spoc".
![http://www.twistecproducts.com/products/dogbone.jpg"](http://www.twistecproducts.com/products/dogbone.jpg"){kind=link}