Alvaro,

> Hi!
> 
> This message officially starts the call for adoption for
> draft-francois-spring-resiliency-use-case.
> 
> Please indicate your position about adopting this use cases draft
> by end-of-day on March 27, 2014.
> 
> http://tools.ietf.org/html/draft-francois-spring-resiliency-use-case
> 
> Thanks!
> 
> Alvaro.

This draft covers more than just use cases, but describes a solution. 
E.g., in section 2:

   This is achieved by
   resetting the B-flag in the related AdjSID's as per the IGP
   extensions defined in [3].

and in section 3:

   An SR solution aimed at supporting these requirements is defined in
   [2].

and in section 5:

   Let us illustrate this for adjacency segments with the following
   example.

   o  Node C is configured with 3 adjacency segments for the connected
      interface to D: AdjSID(CD1), AdjSID(CD2) and AdjSID(CD3)
   o  SR Flow F1: from A to E over segment list
      {NodeSID(C), AdjSID(CD1), NodeSID(E)}
   o  SR Flow F2: from F to I over segment list
      {NodeSID(C), AdjSID(CD2), NodeSID(I)}
   o  SR Flow F3: from G to Z over segment list
      {NodeSID(C), AdjSID(CD3), NodeSID(Z)}
   o  Node C is configured with a distinct protection technique for each
      adjacency segment.  AdjSID(CD1) is configured without protection,
      AdjSID(CD2) is configured to benefit from management-free local
      protection and AdjSID(CD3) is configured for managed local
      protection over the path {AdjSID(CH), AdjSID(HD)}

   Such a co-existence is partially supported by the SR IGP extensions
   [ref tbd]
   o  Multiple adjacency segments can be advertised for the same
      adjacency
   o  The non-protected property of AdjSID(CD1) is signalled by a reset
      B flag.
   o  The protected property of AdjSID(CD2) and AdjSID(CD3) are
      signalled by a set B flag.

   The SR IGP extension should be extended to discreminate between
   AdjSID(CD2) and AdjSID(CD3).  A single flag could be defined (managed
   path vs fully automated).

The SPRING resiliency use case document has to elaborate each use
case in sufficient details that we could each read it and agree on
how the functionality would be accomplished, but without describing
the actual solutions.

Yakov.

_______________________________________________
spring mailing list
[email protected]
https://www.ietf.org/mailman/listinfo/spring

Reply via email to