Stephane, Lots of thanks for formulating the questions that, from my POV, should be answered (one way or another). As I see it, they are:
1. Is transit node per SR-TE LSP statistics a problem that should be solved? 2. If yes: a. Is it a critical or “nice to have” issue? Or something in between? b. Should the solution be localized in the NEs or moved to an external entity? Regards, Sasha Office: +972-39266302 Cell: +972-549266302 Email: [email protected] From: [email protected] [mailto:[email protected]] Sent: Thursday, November 16, 2017 12:49 PM To: Robert Raszuk <[email protected]>; Alexander Vainshtein <[email protected]> Cc: spring <[email protected]>; Clarence Filsfils <[email protected]>; mpls <[email protected]>; Michael Gorokhovsky <[email protected]>; [email protected]; draft-hegde-spring-traffic-accounting-for-sr-paths <[email protected]>; Zafar Ali (zali) <[email protected]> Subject: RE: [mpls] [spring] Special purpose labels in draft-hegde-spring-traffic-accounting-for-sr-paths Hi, Yes today we do not have any CLI command on any router to get paths statistics for LDP (I mean Ingress to Egress) as LDP is based on MP2P LSPs, so a transit node does not have the knowledge of the source. From an operational point of view, what we do today is that we collect netflow statistics on core routers, we project the label stack onto the routing with an external tool to get the Ingress to Egress LDP traffic including the mapping of the flows on the links. Now for RSVP, we do have such statistics as the LSP is P2P and has states on every node. Robert mentioned correctly that SR-TE (especially with MPLS dataplane) has limited TE features (we cannot mimic all what RSVP does in SRTE without adding too much complexity). Thus, is it a problem (transit node stats) worth to be solved ? If yes, where do we accept to put the complexity ? For a stats issue I would rather prefer to move the complexity to an external tool that can do correlations or whatever operations rather than getting it in the forwarding plane… IMO, that’s a “nice to have” problem to solve getting that we do not have this for LDP and we know the limitations of SR-TE MPLS. However, Ingress stats per SRTE LSP are for sure mandatory to get ! The main drawback I see with the proposed solution is that it mimics what Entropy label does with a solution which is similar and at the same time cannot replace entropy label as the provided entropy is far from being sufficient (this is not the goal I know, but I was looking for potential use case optimizations). So in a network running entropy label and this mechanism, a router will need to find the ELI/EL and hash, then find another special label to build the stats (maybe tomorrow there will be a third one to look at and a fourth one…). That starts to be a big overhead for the forwarding plane. Brgds, Stephane From: mpls [mailto:[email protected]] On Behalf Of Robert Raszuk Sent: Thursday, November 16, 2017 16:23 To: Alexander Vainshtein Cc: spring; Clarence Filsfils; mpls; Michael Gorokhovsky; [email protected]<mailto:[email protected]>; draft-hegde-spring-traffic-accounting-for-sr-paths; Zafar Ali (zali) Subject: Re: [mpls] [spring] Special purpose labels in draft-hegde-spring-traffic-accounting-for-sr-paths Folks, This thread started and the requirements reported clearly stated that all what we need is the ability to account per path traffic on egress nodes. Now out of the sudden I see requirement popping up to be able to measure per path in transit nodes. Well you can do it today with SRv6 if your hardware allows or you can do it with RSVP-TE. SR-MPLS is replacing LDP and adds ability for limited TE. But SR-MPLS never intended to become connection oriented protocol nor architecture. So I recommend we take a step back here. Or if you like first go and fix basic MPLS LDP LSPs to allow per end to end path accounting in transit nodes then come back here to ask for the same in SR-MPLS. Not the other way around. Thx r. On Nov 16, 2017 16:12, "Alexander Vainshtein" <[email protected]<mailto:[email protected]>> wrote: Greg, I concur with your position: let’s first of all agree that ability to measure traffic carried by an SR-TE LSP in a specific transit node is a require OAM function for SR. I have looked up the SR OAM Use Cases<https://datatracker.ietf.org/doc/draft-ietf-spring-oam-usecase/?include_text=1> draft, and I did not find any relevant use cases there. The only time measurements are mentioned is a reference to an expired implementation report<https://tools.ietf.org/html/draft-leipnitz-spring-pms-implementation-report-00> draft discussing delay measurements. Since delay measurements are in any case based on synthetic traffic, and are always end-to-end (one-way or two-way), this reference is not relevant, IMHO, for this discussion. I have added the authors of the SR OAM Use Cases draft to tis thread. Regards, Sasha Office: +972-39266302<tel:+972%203-926-6302> Cell: +972-549266302<tel:+972%2054-926-6302> Email: [email protected]<mailto:[email protected]> From: mpls [mailto:[email protected]<mailto:[email protected]>] On Behalf Of Greg Mirsky Sent: Thursday, November 16, 2017 4:28 AM To: Xuxiaohu <[email protected]<mailto:[email protected]>> Cc: draft-hegde-spring-traffic-accounting-for-sr-paths <[email protected]<mailto:[email protected]>>; spring <[email protected]<mailto:[email protected]>>; Zafar Ali (zali) <[email protected]<mailto:[email protected]>>; mpls <[email protected]<mailto:[email protected]>> Subject: Re: [mpls] [spring] Special purpose labels in draft-hegde-spring-traffic-accounting-for-sr-paths Dear All, I cannot imagine that operators will agree to deploy network that lacks critical OAM tools to monitor performance and troubleshoot the network. True, some will brave the challenge and be the early adopters but even they will likely request that the OAM toolbox be sufficient to support their operational needs. I see that this work clearly describes the problem and why ability to quantify the flow behavior at internal nodes is important for efficient network operation. First let's discuss whether the case and requirement towards OAM is real and valid. Then we can continue to discussion of what measurement method to use. Regards, Greg On Thu, Nov 16, 2017 at 10:05 AM, Xuxiaohu <[email protected]<mailto:[email protected]>> wrote: Concur. Although it has some values, it's not cost-efficient from my point of view. Network simplicity should be the first priority object. Hence we would have to make some compromise. Best regards, Xiaohu ________________________________ 徐小虎 Xuxiaohu M：+86-13910161692<tel:+86-13910161692> E：[email protected]<mailto:[email protected]> 产品与解决方案-网络战略与业务发展部 Products & Solutions-Network Strategy & Business Development Dept 发件人： Zafar Ali (zali) 收件人： Greg Mirsky<[email protected]<mailto:[email protected]>>;draft-hegde-spring-traffic-accounting-for-sr-paths<[email protected]<mailto:[email protected]>>;mpls<[email protected]<mailto:[email protected]>>;spring<[email protected]<mailto:[email protected]>> 主题： Re: [mpls] [spring] Special purpose labels in draft-hegde-spring-traffic-accounting-for-sr-paths 时间： 2017-11-16 02:24:10 Hi, This draft breaks the SR architecture. I am quoting a snippet from abstract of SR Architecture document https://tools.ietf.org/html/draft-ietf-spring-segment-routing-13, which states: “SR allows to enforce a flow through any topological path while maintaining per-flow state only at the ingress nodes to the SR domain.” In addition to creating states at transit and egress nodes, the procedure also affects the data plane and makes it unscalable. It also makes controller job much harder and error prune. In summary, I find the procedure very complex and unscalable. Thanks Regards … Zafar From: spring <[email protected]<mailto:[email protected]>> on behalf of Greg Mirsky <[email protected]<mailto:[email protected]>> Date: Wednesday, November 15, 2017 at 11:10 AM To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>, "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>, "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>> Subject: [spring] Special purpose labels in draft-hegde-spring-traffic-accounting-for-sr-paths Hi Shraddha, thank you for very well written and thought through draft. I have these questions I'd like to discuss: �. Have you thought of using not one special purpose label for both SR Path Identifier and SR Path Identifier+Source SID cases but request two special purpose labels, one for each case. Then the SR Path Identifier would not have to lose the bit for C flag. �. And how you envision to collect the counters along the path? Of course, a Controller may query LSR for all counters or counters for the particular flow (SR Path Identifier+Source SID). But in addition I'd propose to use in-band mechanism, perhaps another special purpose label, to trigger the LSR to send counters of the same flow with the timestamp out-band to the predefined Collector. �. And the last, have you considered ability to flush counters per flow. In Scalability Considerations you've stated that counters are maintained as long as collection of statistics is enabled. If that is on the node scope, you may have to turn off/on the collection to flush off some old counters. I think that finer granularity, per flow granularity would be useful for operators. Again, perhaps the flow itself may be used to signal the end of the measurement and trigger release of counters. Regards, Greg ___________________________________________________________________________ This e-mail message is intended for the recipient only and contains information which is CONFIDENTIAL and which may be proprietary to ECI Telecom. If you have received this transmission in error, please inform us by e-mail, phone or fax, and then delete the original and all copies thereof. ___________________________________________________________________________ _______________________________________________ mpls mailing list [email protected]<mailto:[email protected]> https://www.ietf.org/mailman/listinfo/mpls _________________________________________________________________________________________________________________________ Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration, Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci. This message and its attachments may contain confidential or privileged information that may be protected by law; they should not be distributed, used or copied without authorisation. If you have received this email in error, please notify the sender and delete this message and its attachments. As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified. Thank you. ___________________________________________________________________________ This e-mail message is intended for the recipient only and contains information which is CONFIDENTIAL and which may be proprietary to ECI Telecom. If you have received this transmission in error, please inform us by e-mail, phone or fax, and then delete the original and all copies thereof. ___________________________________________________________________________
_______________________________________________ spring mailing list [email protected] https://www.ietf.org/mailman/listinfo/spring
