Thanks Ketan, My query is
If we allocate SRv6 Service SID per-VRF Let's assume For this VRF locator assigned is 2001:129:1:13:: DT4 SID is-2001:129:1:13::4 DT6 SID is - 2001:129:1:13::6 a) Now how to support Different flex algo for different routes with in a VRF ? For VRF1 Prefix 10.129.0.0 I want to use color 129...this is OK * BGP Prefix: 10.129.0.0/16 * color: 129 * Service SID: 2001:129:1:13::4 (DT4 SID) For VRF1 Prefix 10.128.0.0 I want to use color 128 * Prefix: 10.128.0.0/16 * color: 128 * Service SID: ? (I don't have service SID based upon color 128, since above allocation is based upon per vrf) Thanks Rajesh Juniper Business Use Only From: Ketan Talaulikar (ketant) <[email protected]> Sent: Tuesday, May 18, 2021 5:35 PM To: Rajesh M <[email protected]>; [email protected]; Clarence Filsfils (cfilsfil) <[email protected]>; [email protected]; [email protected]; [email protected] Subject: RE: https://datatracker.ietf.org/doc/html/draft-ietf-bess-srv6-services [External Email. Be cautious of content] Hi Rajesh, The FlexAlgo for SRv6 is described in https://datatracker.ietf.org/doc/draft-ietf-lsr-flex-algo/<https://urldefense.com/v3/__https:/datatracker.ietf.org/doc/draft-ietf-lsr-flex-algo/__;!!NEt6yMaO-gk!Xn4WAWuXx98Jdyu7VzfkC3hjctbWJEnPiTUcj_bAML3F17iJrr77ruwLY3XyBBXQ$> and that would require different SRv6 Locators for the FlexAlgo. When the SRv6 Service SID is allocated from the SRv6 Locator for a FlexAlgo then the service flow will be forwarded along with FlexAlgo path. I am not entirely sure that I got your question though. Thanks, Ketan From: Rajesh M <[email protected]<mailto:[email protected]>> Sent: 17 May 2021 12:30 To: [email protected]<mailto:[email protected]>; Clarence Filsfils (cfilsfil) <[email protected]<mailto:[email protected]>>; Ketan Talaulikar (ketant) <[email protected]<mailto:[email protected]>>; [email protected]<mailto:[email protected]>; [email protected]<mailto:[email protected]>; [email protected]<mailto:[email protected]> Subject: https://datatracker.ietf.org/doc/html/draft-ietf-bess-srv6-services Hi All, As per draft "When providing best-effort connectivity to the egress PE, the ingress PE encapsulates the payload in an outer IPv6 header where the destination address is the SRv6 Service SID associated with the related BGP route update." If we allocate SRv6 Service SID per-VRF then how to support a) Different flex algo with in a VRF ? b) Different flex algo with in a internet (default VRF or global) Thanks Rajesh Juniper Business Use Only
_______________________________________________ spring mailing list [email protected] https://www.ietf.org/mailman/listinfo/spring
