Hi! The value of the SRv6 Endpoint Behavior is based on the behavior itself, not on the SID or the function (0x0100, in this example).
In this case, the Endpoint Behavior is End.X (Endpoint with L3 cross-connect), which has a value of 5. See Table 6 in Section 10.2.2. This report should be Rejected. Thanks! Alvaro. On May 14, 2026 at 2:09:13 AM, RFC Errata System ([email protected]) wrote: The following errata report has been submitted for RFC8986, "Segment Routing over IPv6 (SRv6) Network Programming". -------------------------------------- You may review the report below and at: https://www.rfc-editor.org/errata/eid8914 -------------------------------------- Type: Editorial Reported by: chiennan_lin <[email protected]> Section: 3.2 Original Text ------------- This SID is advertised in the control plane as 2001:db8:bbbb:3:100:: with an SRv6 Endpoint Behavior codepoint value of 5. Corrected Text -------------- This SID is advertised in the control plane as 2001:db8:bbbb:3:100:: with an SRv6 Endpoint Behavior codepoint value of 4. Notes ----- 100 -> is value 4 Instructions: ------------- This erratum is currently posted as "Reported". (If it is spam, it will be removed shortly by the RFC Production Center.) Please use "Reply All" to discuss whether it should be verified or rejected. When a decision is reached, the verifying party will log in to change the status and edit the report, if necessary. -------------------------------------- RFC8986 (draft-ietf-spring-srv6-network-programming-28) -------------------------------------- Title : Segment Routing over IPv6 (SRv6) Network Programming Publication Date : February 2021 Author(s) : C. Filsfils, Ed., P. Camarillo, Ed., J. Leddy, D. Voyer, S. Matsushima, Z. Li Category : PROPOSED STANDARD Source : Source Packet Routing in Networking Stream : IETF Verifying Party : IESG _______________________________________________ spring mailing list -- [email protected] To unsubscribe send an email to [email protected]
_______________________________________________ spring mailing list -- [email protected] To unsubscribe send an email to [email protected]
