The following errata report has been verified for RFC10038, "Distributing the Segment Routing over IPv6 (SRv6) Locator Using DHCPv6"
-------------------------------------- You may review the report below and at: https://errata.rfc-editor.org/eid9210/ -------------------------------------- Status: Verified Type: Technical Reported by: Paul Aitken <[email protected]> Date Reported: Oct. 7, 2026, 1:10 p.m. Verified by: Jim Guichard (IESG) Section 4.2 says: Original Text ------------- IALocator-Options: Options associated with this SRv6 Locator. A variable-length field (determined by subtracting the length of SRv6-Locator from Option-Len minus 12). The status code NoSRv6LocatorAvail indicates the server has no locators available to assign to the IA_SRV6_LOCATOR(s). Corrected Text -------------- IALocator-Options: Options associated with this SRv6 Locator. A variable-length field (determined by subtracting the length of SRv6-Locator from Option-Len minus 16). The status code NoSRv6LocatorAvail indicates the server has no locators available to assign to the IA_SRV6_LOCATOR(s). Notes ----- Correct "12" to "16". Section 4.2 defines: "Option-Len: 16 + the length of SRv6-Locator + the length of the IALocator-Options field in octets." Therefore the length of IALocator-Options is Option-Len − 16 − length(SRv6-Locator) , i.e. "Option-Len minus 16," not "Option-Len minus 12." The erroneous "12" may have been carried over from the IA_SRV6_LOCATOR option in Section 4.1, whose fixed portion (IAID + T1 + T2 = 12 octets) is correctly "Option-Len minus 12." -------------------------------------- RFC10038 (draft-ietf-spring-dhc-distribute-srv6-locator-dhcp) -------------------------------------- Title : Distributing the Segment Routing over IPv6 (SRv6) Locator Using DHCPv6 Publication Date : August 2026 Author(s) : W. Cheng, Ed., R. Han, C. Lin, Ed., D. Voyer, G. Zhang Category : Proposed Standard Source : spring (rtg) Stream : IETF _______________________________________________ spring mailing list -- [email protected] To unsubscribe send an email to [email protected]
