No, this is just a packing shed out in the country.  They pack and ship from
this facility.  This building is where the farmers bring the bins and they
are stored here until they go into the packing and fumigation facility.  The
bins are +/- 44" square stored 4 to 5 high, which comes out to 21'-8 at 5
high.  

Gregg Fontes
Cen-Cal Fire Systems, Inc.
209-334-9119

-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Todd Williams
Sent: Tuesday, December 19, 2006 12:08 PM
To: [email protected]
Subject: RE: Walnuts Storage

Since nuts and beans are listed as Class III in A5.6.3, I think you may be
on the right track. As far as the bins go, I think you would have to look at
it based on the percentages in 5.6.3.4.1. If there are any oils within the
shells that could be combustible, this might change. Also, are they grinding
the shells up? If so, is there a dust hazard?

I am very familiar with nuts. I get called that frequently.

Todd G. Williams, PE
Fire Protection Design/Consulting
Stonington, Connecticut
860.535.2080
www.fpdc.com


-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Gregg Fontes
Sent: Tuesday, December 19, 2006 9:50 AM
To: [email protected]
Subject: Walnuts Storage

Would everyone agree that walnuts in their shells, stored in wood bins, can
be considered a Class III commodity?  If stored in plastic bins, would it
still be considered a Class III commodity?  The storage is general floor
storage, no rack storage.

Thanks,
Gregg Fontes
Cen-Cal Fire Systems, Inc.
209-334-9119

_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum

_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum


_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum

Reply via email to