Well typical paper has a HRH of around 8,000 BTU/lb. So what's the
weight of the paper per sq ft. If it is more than 2 ounces, it's a
no go.
Roland
On Feb 12, 2007, at 12:57 PM, Gumkowski,Anthony Charles wrote:
Forum Members:
According to NFPA 13 section 8.15.1.2 (and the 16 subsections to that
section) sprinkler protection is required for this concealed space
UNLESS the requirements of 8.15.1.2.12 (insulation facing and
substrate
material does not exceed 1000 BTU/sq. ft.) applies.
Can anyone tell me where I can find documentation that will
identify for
me the heat content of this type of paper-faced fiberglass insulation
materia?
Tony Gumkowski
======================================================================
========
This communication, together with any attachments hereto or links
contained herein, is for the sole use of the intended recipient(s)
and may contain information that is confidential or legally
protected. If you are not the intended recipient, you are hereby
notified that any review, disclosure, copying, dissemination,
distribution or use of this communication is STRICTLY PROHIBITED.
If you have received this communication in error, please notify the
sender immediately by return e-mail message and delete the original
and all copies of the communication, along with any attachments
hereto or links herein, from your system.
======================================================================
========
The St. Paul Travelers e-mail system made this annotation on
02/12/07, 15:57:46.
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum
