Todd, Not exactly sure what you are looking for - specific time-temp curves for a specific compartment and fire or simple generic graphs. There are number of different types of hazard calcs, models, etc. that could be used and then you have the variables of HRR vs. time (steady, unsteady) ceiling height, radial distance from the fire, etc., pre-flashover, post-flashover if flashover is reached. If you are looking for say ceiling jet temp vs. time in the early stage of the fire, you could use one of the ceiling jet temp correlations after you choose your HRR vs. time, ceiling height, etc. if the correlation is appropriate given your inputs. If you are just looking for examples, the NIST analysis and report for the Station nightclub fire should have time v. temp data for the FDS modeling and partial mock-up fire.
Rich Richard Malek [EMAIL PROTECTED] -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of FPDC Sent: Wednesday, September 26, 2007 5:23 AM To: [email protected] Subject: ceiling temperature graph Somewhere in my travels I have seen a graph of ceiling temperature vs time in a fire, but I can't seem to find it. The FP Handbook has heat release vs time, but temperature is what I need for a selling point in an argument. Does naybody know where I could get this? Thanks Todd G. Williams, PE Fire Protection Design/Consulting Stonington, Connecticut www.fpdc.com 860.535.2080 _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum To Unsubscribe, send an email to:[EMAIL PROTECTED] (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum To Unsubscribe, send an email to:[EMAIL PROTECTED] (Put the word unsubscribe in the subject field)
