http://www.gemplers.com/search/Rust+Converter We've used this on large
flanged fittings, and it works pretty well.
Thom McMahon
Firetech, Inc.
2560 Copper Ridge Dr
Steamboat Springs, CO 80488-2136
Tel: 970-879-7952
Fax: 970-879-7926
----- Original Message -----
From: "Jamie Seidl" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Tuesday, February 05, 2008 9:00 AM
Subject: RE: rust remover
Wire brush, then wipe fitting w/ an oily rag. As a helper, I did this a lot
when laying out a system. Just another step, added to the layout and dope
phase.
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Greg McGahan
Sent: Tuesday, February 05, 2008 10:20 AM
To: [email protected]
Subject: rust remover
Does anyone know of a cleaner that will remove surface rust off of CI
fittings? NOT Ospho or similar, we don't need a coating, we need
something to remove it from sitting outside on the job too long.
Thank you,
Greg McGahan
Living Water Fire Protection, LLC
1160 McKenzie Road
Cantonment, FL 32533
850-937-1850
Fax: 850-937-1852
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum
To Unsubscribe, send an email to:[EMAIL PROTECTED]
(Put the word unsubscribe in the subject field)
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum
To Unsubscribe, send an email to:[EMAIL PROTECTED]
(Put the word unsubscribe in the subject field)
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum
To Unsubscribe, send an email to:[EMAIL PROTECTED]
(Put the word unsubscribe in the subject field)
