Not kilns. I meant veneer dryers. Forest Wilson Cherokee Fire Sent from my Verizon Wireless BlackBerry
-----Original Message----- From: [email protected] Date: Mon, 2 Feb 2009 23:06:32 To: <[email protected]> Subject: Re: Sprinkler protection below conveyors in pits Or a Viking nozzle which is what is used in kilns. Forest Wilson Cherokee Fire Sent from my Verizon Wireless BlackBerry -----Original Message----- From: "George Church" <[email protected]> Date: Mon, 2 Feb 2009 18:03:17 To: <[email protected]> Subject: RE: Sprinkler protection below conveyors in pits I'd look at the spray patterns. And consider if an attic upright (AP), or CC1, could be applied. They have very flat patterns for their application, might be useful for that little sliver you're trying to protect. glc -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Ryan Hinson Sent: Monday, February 02, 2009 5:56 PM To: [email protected] Subject: Sprinkler protection below conveyors in pits Where would I go to properly protect below conveyors in pits that there is less then 4' of clear space below the return loop of the conveyor and the conveyer belt is 60" wide with SSU's? NFPA 13(2002) section 8.6.5 does not address this situation in my opinion. What is the space depth at which sprinklers are no longer able to develop the water pattern necessary to be practicable? Thank you, Ryan L. Hinson, EIT, CET, Nicet III FP Design Manager Fire Construction Design Services, LLC #C124 A Division of Fire Construction Services, Inc. 6950-43rd Avenue SE St. Cloud, MN 56304 Direct: 320-250-5404 Fax: 320-358-3495 email: <mailto:[email protected]> [email protected] CONFIDENTIALITY NOTICE: The information contained in this message, including any files transmitted within, is confidential, may be legally privileged, and is intended only for the use of the individual(s) named above. The use of any confidential or personal information may be restricted by state and federal privacy laws. If this message was received in error, please notify the sender and then delete this message. _______________________________________________ Sprinklerforum mailing list http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field)
_______________________________________________ Sprinklerforum mailing list http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field)
