I would just ask the fab shop to quote it. ------Original Message------ From: Davis, Adam Sender: [email protected] To: [email protected] ReplyTo: [email protected] Subject: Galvanized pipe - threaded reducer tees vs. thread-o-lets Sent: May 12, 2009 9:29 AM
I have a 6" galvanized main and have to come off with 40 2" branch lines. I'm trying to determine the least costly way to transition to the 2" branch lines. The two options I have are using 6"x2" threaded reducer tee or 2" thread-o-let and re-galvanizing the weld. The client requires galvanized pipe and does not want to use mechanical clamp fittings. Any suggestions to which method is the least expensive? Thanks Adam Davis NOTICE - This communication may contain confidential and privileged information that is for the sole use of the intended recipient. Any viewing, copying or distribution of, or reliance on this message by unintended recipients is strictly prohibited. If you have received this message in error, please notify us immediately by replying to the message and deleting it from your computer. _______________________________________________ Sprinklerforum mailing list http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field) Forest Wilson Project Manager Cherokee Fire Protection Co. 1855 Bellbrook Ave. Ste C Xenia OH 45385 888-347-3079 ph 614-455-4324 fx _______________________________________________ Sprinklerforum mailing list http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field)
