Especially since if you they are requesting it you'll need them to fill in
the paperwork to get KNOX caps. They don't sell to us contractors, without
the FDP account #

Thom McMahon, SET
Firetech, Inc.
2560 Copper Ridge Dr
P.O. Box 882136
Steamboat Springs, CO 80488
Tel:  970-879-7952
Fax: 970-879-7926



-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Steve Leyton
Sent: Friday, November 20, 2009 12:59 PM
To: [email protected]
Subject: RE: Hose Valves

You should check with your local fire department to see if they'll even
allow this.   Or did the request come from them?   If the latter,
wouldn't they have a spec?

Steve Leyton
Protection Design & Consulting
San Diego, CA



-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Haug, Marc
Sent: Friday, November 20, 2009 11:54 AM
To: [email protected]
Subject: Hose Valves

I have been asked to provide locking caps for standpipe fire department
angle valves. We are looking at Knox, Capits etc.. One of the guys in our
ofice has suggested that there is a red locking cover that shrouds the valve
and cap which then locks shut with a break shackle breakable lock. Has
anyone ever seen this type of cover. 
 
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum

For Technical Assistance, send an email to: [email protected]

To Unsubscribe, send an email
to:[email protected]
(Put the word unsubscribe in the subject field)
 

__________ Information from ESET NOD32 Antivirus, version of virus signature
database 4625 (20091120) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com
 
 

__________ Information from ESET NOD32 Antivirus, version of virus signature
database 4625 (20091120) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com
 
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum

For Technical Assistance, send an email to: [email protected]

To Unsubscribe, send an email to:[email protected]
(Put the word unsubscribe in the subject field)

_______________________________________________
Sprinklerforum mailing list
[email protected]
http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum

For Technical Assistance, send an email to: [email protected]

To Unsubscribe, send an email to:[email protected]
(Put the word unsubscribe in the subject field)

Reply via email to