A.5.14.5 of NFPA 20 2007 ed. says that if the supply is from public water mains then the gate valve SHOULD be located as far as is practical from the suction flange. I'm not sure why because the commentary goes on to say that the gate valve does not interfere with the flow when it is fully open.
Reed A. Roisum, CET Fire Protection Ulteig Engineers, Inc. 3350 38th Avenue S. Fargo, ND 58104 701.280.8580 direct 701.212.8810 cell www.ulteig.com Energy | Water | Built-Environment CONFIDENTIAL COMMUNICATION: Emails from this company normally contain confidential and privileged material, and are for the sole use of the intended recipient. Use or distribution by an unintended recipient is prohibited, and may be a violation of law. If you believe that you received this in error, please do not read the body of this e-mail and please inform the sender that you have deleted the e-mail and any copies. Thank you. ----- Original Message ----- From: "Dewayne Martinez" [deway...@dbfp.net] Sent: 12/09/2009 11:04 AM CST To: <sprinklerforum@firesprinkler.org> Subject: RE: fire pump - 10 diameters Your right Thom, in fact NFPA 20 only requires the 10 pipe diameters distance for a horizontal split case. Dewayne Martinez Design Build Fire Protection New Berlin, WI -----Original Message----- From: sprinklerforum-boun...@firesprinkler.org [mailto:sprinklerforum-boun...@firesprinkler.org] On Behalf Of Thom McMahon Sent: Wednesday, December 09, 2009 9:42 AM To: sprinklerforum@firesprinkler.org Subject: RE: fire pump - 10 diameters In line pumps are generally more forgiving than other pumps as far as the 10X dia. Thom McMahon, SET Firetech, Inc. 2560 Copper Ridge Dr P.O. Box 882136 Steamboat Springs, CO 80488 Tel: 970-879-7952 Fax: 970-879-7926 -----Original Message----- From: sprinklerforum-boun...@firesprinkler.org [mailto:sprinklerforum-boun...@firesprinkler.org] On Behalf Of Bobby Gillett Sent: Wednesday, December 09, 2009 8:42 AM To: sprinklerforum@firesprinkler.org Subject: RE: fire pump - 10 diameters I have applied it with the OS&Y and never had any problems from AHJ of pump rep. This is a horizontal bend not vertical correct? I have piped up and back down in an extremely tight space. Bobby Gillett _______________________________________________ Sprinklerforum mailing list Sprinklerforum@firesprinkler.org http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: supp...@firesprinkler.org To Unsubscribe, send an email to:sprinklerforum-requ...@firesprinkler.org (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list Sprinklerforum@firesprinkler.org http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: supp...@firesprinkler.org To Unsubscribe, send an email to:sprinklerforum-requ...@firesprinkler.org (Put the word unsubscribe in the subject field) This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. Wrongful use of this information for purposes inconsistent with Victaulic interests may result in legal action or prosecution. Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. E-mail transmission cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. The sender therefore does not accept liability for any errors or omissions in the contents of this message, which arise as a result of e-mail transmission. _______________________________________________ Sprinklerforum mailing list Sprinklerforum@firesprinkler.org http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: supp...@firesprinkler.org To Unsubscribe, send an email to:sprinklerforum-requ...@firesprinkler.org (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list Sprinklerforum@firesprinkler.org http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: supp...@firesprinkler.org To Unsubscribe, send an email to:sprinklerforum-requ...@firesprinkler.org (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list Sprinklerforum@firesprinkler.org http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: supp...@firesprinkler.org To Unsubscribe, send an email to:sprinklerforum-requ...@firesprinkler.org (Put the word unsubscribe in the subject field)