Jose,

I would suggest contacting Reliable sprinkler. I recall hearing something
about a listing they got over 45'-0" ceiling with there HL22 ESFR. Max
48'-0" building and max storage height of 43ft with no in-rack spkrs. Not
sure about encapsulated product.

Take a look at this link under HL22 midway down the page.

http://www.reliablesprinkler.com/new_products.php

Good luck

Ken Holsopple

-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Jose Saldivia
Sent: Wednesday, December 16, 2009 5:04 PM
To: [email protected]
Subject: ESFR K 25.2 SPRINKLER AT 47 FEET HEIGHT CEILING ALTERNATIVES.

dI have a situation asI have a situation with a hazard as follow, double row
rack storage, commodity Class III encapsulated, maximum storage height 40’,
aisles, 10’ wide. Roof with a slope of 3.5%, maximum height of 47’3” and
38’6” minimum, total area to be protected with sprinklers 232.000 sqft, area
with ceiling heights above 45’ 57.000 sqft (approximately 25% of total area)
We're being up to 2’4” above the maximum height established by  NFPA, FM and
UL for a  K25.2 ESFR sprinklers.

Do Do you have a different recommendation than use IRAS and ceiling ELO
sprinklers?, maybe increase the design area or increase the sprinkler
working pressure for the ESFR and remove or reduce the levels of IRAS.

Regards,

José Saldivia.
Incisan Fire C.A.
Venezuela.





_______________________________________________
Sprinklerforum mailing list
[email protected]
http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum

For Technical Assistance, send an email to: [email protected]

To Unsubscribe, send an email to:[email protected]
(Put the word unsubscribe in the subject field)


_______________________________________________
Sprinklerforum mailing list
[email protected]
http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum

For Technical Assistance, send an email to: [email protected]

To Unsubscribe, send an email to:[email protected]
(Put the word unsubscribe in the subject field)

Reply via email to