Download Trueview from the below link. It works perfect and will convert any version to 2000 or 2004. The proxy objects will still be there but you can explode them at that point and work with them.
http://usa.autodesk.com/adsk/servlet/pc/index?id=6703438&siteID=123112 Don -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Todd Williams Sent: Tuesday, March 16, 2010 6:29 AM To: [email protected] Subject: Architectural Desktop Here's one for the computer jockeys. Has anyone had problems converting drawings from architects drawn in Architectural Desktop? I am running in to situations where ceiling plans, walls at angles, etc. are not showing up or just showing as a large rectangle covering the overall area. I am using Autosprink, but the same thing is happening when I open it up in regular Autocad (2006). Thoughts? Todd G. Williams, PE Fire Protection Design/Consulting Stonington, Connecticut 860-535-2080 www.fpdc.com _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field)
