GFE Manufacturing has one called an HK-25 I think. Akron Brass sells them. Otherwise, I my preferred set was from Potter Roemer including a directional diffuser. I believe the model number for it is 6188. The S/R cap is 6184. It came in a nice case. I also ordered their standard pitot knife, # 6177 and a spanner wrench(not sure of that model).
Ryan Hinson Burns & McDonnell Direct: 952-656-6003 Ext 3662 -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Steve Kowkabany Sent: Friday, June 25, 2010 4:24 PM To: [email protected] Subject: Flow Test Kits Any suggestions on where I should go to get a good basic flow test kit at a reasonable price including: 1) A diffuser with a fixed pitot port and pressure gauge for the flow hydrant 2) A cap with a gauge for the static/residual hydrant 3) A spanner wrench 4) Preferably a basic case I need something light and portable that I can take on a plane with me for some testing at a variety of sites over the coming months, where the local utilities don't have this equipment and we won't have any contractor help available. Thanks in advance for any thoughts, Steve Kowkabany, P.E. Fire Protection Engineer Neptune Fire Protection Engineering LLC 60 Ocean Boulevard, Suite 15 Atlantic Beach, FL 32233 904-652-4200 Phone 904-212-0868 Fax _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field)
