The upright ESFR is less of a problem with obstructions, you may pay a
little more but can help a lot with obstruction issues and you can mix
pendents and uprights.

Richard Carr, SET
Design Manager
Associated Sprinkler Co., LLC
336.373.3901 ext 217
[email protected]



-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Brian
Harris
Sent: Wednesday, June 30, 2010 10:39 AM
To: [email protected]
Subject: ESFR Heads

I know a couple years ago they only made ESFR heads in the pendent
position,
now that they make them in uprights as well is there a benefit one way
or
another these days with still sticking to the pendent only method? I
know
you get a couple extra inches of space allowed from deck to deflector
but
other than that is one way better than the other?
 

Brian Harris

 

 


Design Engineer

 

First Defense Fire Protection
11957 Ramah Church Road
Huntersville NC 28078




[email protected]
www.firstdefensefire.com <outbind://80/www.firstdefensefire.com> 

 

Ph: 704.948.3506
Fax: 704.948.3507

 

 
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum

For Technical Assistance, send an email to: [email protected]

To Unsubscribe, send an email
to:[email protected]
(Put the word unsubscribe in the subject field)


This email and any attached files are confidential and intended solely for the 
intended recipient(s). If you are not the named recipient you should not read, 
distribute, copy or alter this email. Any views or opinions expressed in this 
email are those of the author and do not represent those of the  company. 
Warning: Although precautions have been taken to make sure no viruses are 
present in this email, the company cannot accept responsibility for any loss or 
damage that arise from the use of this email or attachments.
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum

For Technical Assistance, send an email to: [email protected]

To Unsubscribe, send an email to:[email protected]
(Put the word unsubscribe in the subject field)

Reply via email to