Well, I spot closet heads on the door wall since there will be shelving around the rest of the perimeter....and you KNOW they'll pile stuff up to the sprinkler.
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of A.P.Silva Sent: Monday, September 27, 2010 11:24 AM To: [email protected] Subject: RE: Distance to light fixtures Is this the general consensus of the forum? If you were faced with locating sidewall sprinklers in a bathroom wall, do you avoid the wall with the bar type lights? Is this based on any code or past experience? I would appreciate more opinions. Tony -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Jamie.seidl Sent: September 24, 2010 3:37 PM To: [email protected] Subject: Re: Distance to light fixtures I'd stay away from locating a sprinkler above the bar type bathroom lights. They can put out quite a lot of heat, and we all know what goes up... This sounds like a residential fixture, if so, the bulbs may be replaced later with a higher wattage creating more heat. Jamie Sent from my iPhone On Sep 24, 2010, at 3:48 PM, "A.P.Silva" <[email protected]> wrote: > > 13, 2007 table 8.3.5.2(c) gives minimum distance from edge of 0 W to > 250 W light fixture to 155 deg.F sprinkler as 6 inches. In what > direction is this measurement taken? > > If both sprinkler head and light fixure are mounted on a ceiling there > is no problem, as it will be the closest horizontal distance. Is it > still the horizontal distance when they are on a different plane? > > My situation is: A sidewall sprinkler mounted on a bathroom wall, 6" > below the ceiling is 10" directly above a four bulb x 60 W (total 240 > W)wall mounted light fixture. Is this acceptable? > > Tony > > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Gregory > Lindholm > Sent: September 24, 2010 10:21 AM > To: SprinklerFORUM > Subject: Seed corn in plastic totes > > > > I have a customer that is looking to build a building with 30' eaves, > storing seed corn in 4' x 4' x 3' high (open top) plastic totes, > stacked as high as possible (over 30' high at the peak). > > Dry systems, so no ESFR. > > We are coming up with Group A plastics, but it looks like the highest > that they could stack is 25'. > > What are we missing, or what are forum members thoughts? > > Greg Lindholm > > > > _______________________________________________ > Sprinklerforum mailing list > [email protected] > http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum > > For Technical Assistance, send an email to: [email protected] > > To Unsubscribe, send an email > to:[email protected] > (Put the word unsubscribe in the subject field) > > _______________________________________________ > Sprinklerforum mailing list > [email protected] > http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum > > For Technical Assistance, send an email to: [email protected] > > To Unsubscribe, send an email > to:[email protected] > (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field)
