Are there other outlets that come off of this 12" line? If not, why not remove the valves and just slide the piping together and use (1) longer spool piece. Or slide every other piece together and use a couple of longer spool pieces.
Thanks, Eric Tysinger CET NICET III - 108988 Designer Wayne Automatic Fire Sprinklers, Inc. 4370 Motorsport Drive Concord, NC 28027 p: (704)782-3032 x1751 f: (704)795-6838 C: (239)633-9703 -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Morey, Mike Sent: Monday, February 21, 2011 10:21 AM To: [email protected] Subject: Spool piece for wafer style butterfly valve Anyone ever seen such an animal? We have a hallway with a number of redundant 12" wafer butterfly valves installed above the ceiling. To reduce maintenance costs and the costs of adding supervision to these valves whcih presently is not provided we would like to replace the valves with spool pieces, but obviously a flange-flange piece can't be fabricated that short. Does anyone have any experience with something like maybe a wafer or wafer lug spool piece that could be used? Or maybe just a solid flange we could rod and nut? -Mike Morey, SET Sprinkler Designer BMW Constructors, Inc. office: 317-651-0596 mobile: 317-439-2695 _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field)
