Thanks -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of ParsleyConsulting Sent: Thursday, September 08, 2011 9:25 AM To: [email protected] Subject: Re: Non-threaded ATR
Dewayne, Both Afcon and Tolco have end-thread only rods, which can be fabricated galvanized. Afcon is Fig 660, I think, and Tolco is Fig 103, I think. Probably some of the other manufacturers have them as well. PARSLEY CONSULTING Ken Wagoner, SET 760.745.6181 voice 760.745.0537 fax [email protected] <mailto:[email protected]>e-mail www.ParsleyConsulting.com <http://www.ParsleyConsulting.com>website On 9/8/2011 6:35 AM, Dewayne Martinez wrote: > I need to use non-threaded galvanized ATR on a project. Anyone know > of a good source for this? It cannot be rubber coated ATR. They will > only allow 3in of threads on each end. > Thanks, > Dewayne > -------------- next part -------------- An HTML attachment was > scrubbed... > URL:<http://fireball.firesprinkler.org/mailman/private/sprinklerforum/ > attachments/20110908/01a22411/attachment.html> > _______________________________________________ > Sprinklerforum mailing list > [email protected] > http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum > > _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum
