Thanks -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Daniel Wilder Sent: Thursday, September 29, 2011 10:07 AM To: [email protected] Subject: RE: Darcy-Weisbach
http://www.dow.com/glycerine/resources/table18.htm http://msdssearch.dow.com/PublishedLiteratureDOWCOM/dh_0047/0901b8038004 79d9.pdf?filepath=propyleneglycol/pdfs/noreg/117-01682.pdf&fromPage=GetD oc Page 22ish http://www.dow.com/glycerine/resources/dwnlit.htm http://www.engineeringtoolbox.com/ethylene-glycol-d_146.html http://www.engineeringtoolbox.com/propylene-glycol-d_363.html Not sure on a specific manufacturer but hopefully this helps. -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Dewayne Martinez Sent: Wednesday, September 28, 2011 7:27 AM To: [email protected] Subject: RE: Darcy-Weisbach It would be nice since we all must use the same mixtures now per NFPA 13 that some data could be included in the next edition. -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Olie Olson Sent: Wednesday, September 28, 2011 8:59 AM To: [email protected] Subject: Darcy-Weisbach I have looked for the same information. The viscosity range as a function of temperature would be a nice chart. I am sure the calculation procedure required is not followed or this information would be available. Olie Olson, P.E. Fire Protection Design 406-860-3170 mobile 406-628-2314 office -----Original Message----- From: Dewayne Martinez Sent: Tuesday, September 27, 2011 5:58 AM To: [email protected] Subject: Darcy-Weisbach Is there any information the forum could pass along to use for the density (lbs/ cu ft) and viscosity (centipoise) of the aqueous glycerin and propylene glycol antifreeze solutions now required by NFPA? The manufacture we use for our pre-mixed solutions does not have much information on this and I finally need to do a calculation with this. I would assume the values should be close to the freezing point of the solution? Thanks, Dewayne Martinez Design Build Fire Protection New Berlin, WI -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://fireball.firesprinkler.org/mailman/private/sprinklerforum/attach ments/20110927/0a9e9af8/attachment.html> _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum
