If it is a conventional head, it is unlike the others I am familiar with. The diameter, tine to tine, is 1-1/2". The tines are straight out, as they would be for a pendent sprinkler. However, the material that was between the tines has been bent down, pointing towards the base of the sprinkler. Installed, it looks like a pendent sprinkler in the upright position (which is what I told the owner and Fire Marshal)
I have contacted Reliable, but have not heard back from them yet. These are installed under a variety of flat ceilings in a school building. I am going to be making the recommendation to replace all of the heads and want to make sure that there is nothing I need to know about first At 11:45 AM 11/25/2011, you wrote: >I bet it's a conventionall head. Bay & beam spacing? > >[] > > >Vince Sabolik, West Tech Fire Protection, Inc. >11351 Pearl Road / Strongsville, Ohio 44136 440 238-4800 Fax 440 >238-4876 >____________________________________________________________________ > Todd G. Williams, PE Fire Protection Design/Consulting Stonington, CT 860.535.2080 www.fpdc.com -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://fireball.firesprinkler.org/mailman/private/sprinklerforum/attachments/20111126/21f26ddb/attachment.html> -------------- next part -------------- A non-text attachment was scrubbed... Name: 46da0a.jpg Type: image/jpeg Size: 13944 bytes Desc: not available URL: <http://fireball.firesprinkler.org/mailman/private/sprinklerforum/attachments/20111126/21f26ddb/attachment.jpg> _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum
