I have an estimating program on excell that has labor items shown in tenths of an hour. You can contact me at [email protected] I am setting it up to be interactive on the internet but could give you a beta version to try. Jerry Schulhoff firewaterdesign Richmond, VA.
> From: [email protected] > To: [email protected] > Subject: Re: Labor rates > Date: Fri, 9 Dec 2011 23:22:08 +0000 > > If you're using these guidelines for change orders most large projects will > accept them. If you're using them for estimating you'll go out of business in > six months. ;-). > Mark at Aero > > ----- Original Message ----- > From: Rod DiBona [mailto:[email protected]] > Sent: Friday, December 09, 2011 05:10 PM > To: [email protected] <[email protected]> > Subject: RE: Labor rates > > We have found RS Means labor multipliers to be very high when applied to a > stock list of an actual job. I am not familiar with MCA but will look into > it. Thanks Mark. > > Rod at Rapid > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of > [email protected] > Sent: Friday, December 09, 2011 11:11 AM > To: [email protected] > Subject: Re: Labor rates > > MCA. RS Means. > > ----- Original Message ----- > From: Rod DiBona [mailto:[email protected]] > Sent: Friday, December 09, 2011 11:18 AM > To: [email protected] <[email protected]> > Subject: Labor rates > > Does anyone know if a resource exists that uniquely identifies labor for each > piece of material for our trade? I know that many plumbing and mechanical > contractors use these that are published in PHCC (and the like). I am > thinking about something more specific to our industry than the means book. I > don't know about you but if our guys installed anywhere close to the means > book we would be out of business. Thank you for any input. I would be willing > to share information on our study with anyone that wants to be part of the > process. Contact on or off forum. Thanks. > > [cid:[email protected]] > Rod DiBona > Vice President > Rapid Fire Protection > office : (605)348-2342 > fax : (605)348-0108 > cell : (605)391-3553 > www.rapidfireinc.com<http://www.rapidfireinc.com> > > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > <http://fireball.firesprinkler.org/mailman/private/sprinklerforum/attachments/20111209/50907f18/attachment.html> > -------------- next part -------------- > A non-text attachment was scrubbed... > Name: image001.jpg > Type: image/jpeg > Size: 6561 bytes > Desc: image001.jpg > URL: > <http://fireball.firesprinkler.org/mailman/private/sprinklerforum/attachments/20111209/50907f18/attachment.jpg> > _______________________________________________ > Sprinklerforum mailing list > [email protected] > http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum > > > _______________________________________________ > Sprinklerforum mailing list > [email protected] > http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum > _______________________________________________ > Sprinklerforum mailing list > [email protected] > http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum > > > _______________________________________________ > Sprinklerforum mailing list > [email protected] > http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://fireball.firesprinkler.org/mailman/private/sprinklerforum/attachments/20111210/76f3619a/attachment.html> _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum
