I believe Central Sales Company in Memphis, TN will do it; this is where we have our backflow testing equipment certified.
Bobby Gillett Sr. Project Manager Key Fire Protection, Inc. (731) 424-0130 office (731) 424-9285 fax (731) 267-4853 cell www.keyfireprotection.com -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Douglas Hicks Sent: Wednesday, May 16, 2012 12:28 PM To: [email protected] Subject: certified gauges We replace gauges every 5 years. I have replaced the gauge and put the old gauge in the test port and compared readings. The readings have always been the same. I can reduce my inventory by purchasing certifed gauges and comparing the readings. If I do this, should we install the certified gauge in the test port at the start of the inspection/test and remove the gauge only at the end of inspection? So, where do I get certified gauges? -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://fireball.firesprinkler.org/mailman/private/sprinklerforum/attachment s/20120516/5418acf5/attachment.html> _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum ----- No virus found in this message. Checked by AVG - www.avg.com Version: 2012.0.2176 / Virus Database: 2425/5002 - Release Date: 05/16/12 _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum
