I was just looking at all the fancy systems that don't make sense to
me. Give me the standard sprinkler. It is still the most reliable.  I was
just thinking about it a little more.  The braded adjustable drop may also
add to the breaking up the sound.  The other thing we did at Bay Pond was to
drop down to go into the studio with the braided rubber hose at the bottom.
It was like passing through a fire wall.  I am not sure the reason but it
was a recommendation.  To date I have not heard an issues with the system.
He certainly produced many records there.  The two broke up so I don't know
what the current status is.  There was a 25M budget plus the recording
equipment.  Not just a run of the mill production.  
        I cannot believe anyone would propose an open head system???????

        Dick

-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of G. Tim Stone
Sent: Thursday, June 14, 2012 5:22 PM
To: [email protected]
Subject: RE: Radio Station Broadcast Studios Suggestion

Thanks to all for your suggestions. The one suggestion I like the best is
the use of a Flexible braided rubber hose to break the connection between
the steel pipe inside the studio and the distribution system outside the
space.


Regards,
G. Tim Stone

G. Tim Stone Consulting, LLC
NICET Level III Engineering Technician
Fire Protection Sprinkler Design
and Consulting Services

                117 Old Stage Rd. - Essex Jct., VT. 05452
CELL: (802) 373-0638   TEL: (802) 434-2968   Fax: (802) 434-4343
                           [email protected]


> -----Original Message-----
> From: [email protected] [mailto:sprinklerforum- 
> [email protected]] On Behalf Of [email protected]
> Sent: Thursday, June 14, 2012 5:03 PM
> To: [email protected]
> Subject: Re: Radio Station Broadcast Studios Suggestion
> 
> Ladies/Gentlemen:
> 
> We have a local public broadcast station here at the community college 
> in Santa Fe - As best I can tell, standard steel pipe/ cast iron 
> fittings w/SR pendent sprinklers two-pc. escutcheons 'dangling' from 
> the ceiling - the only restriction that has been placed on our firm 
> (past 15 years) is to do inspections/alarm initiation during early AM 
> hours when station is on 'auto-pilot'.
> 
> That said, what say you to actually using CPVC (as opposed to "rigid
> steel") dropping down and going through walls with QR concealed HSW 
> (VK-408??)...Bet that might work - that is, unless the sound engineer 
> is just being cantankerous and is trying his best to ward off those 
> 'noisy' sprinklers? CPVC might be "Sound of Silence" 
> (Simon/Garfunkle?)
> 
> We converse regularly with out local PBS personnel at studio - never 
> had a complaint about sprinkler 'sounds'...
> 
> Regards to all-
> 
> Jerry
> [email protected]
> 
> Jerry D. Watts, SFPE
> President/Co-Founder
> ACCENT FIRE ENGINEERING INT'L. Ltd.*
> Santa Fe/Albuquerque  New Mexico
> Seattle, WA  San Diego, CA  Phoenix, AZ
> (800) 503.1961
> 
> *Licensed Fire Engineers - Architects/Inspectors/Fire Investigators:
> AZ CA  CO  NM  NV  NY  TX  UT  KS  MD  MS
> -------------- next part -------------- An HTML attachment was 
> scrubbed...
> URL:
> <http://fireball.firesprinkler.org/mailman/private/sprinklerforum/atta
> c hments/20120614/5cb1a5e2/attachment.html>
> _______________________________________________
> Sprinklerforum mailing list
> [email protected]
> http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum


_______________________________________________
Sprinklerforum mailing list
[email protected]
http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum

_______________________________________________
Sprinklerforum mailing list
[email protected]
http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum

Reply via email to