How about this from 20 (1999)..., 3.4.2 " The base plate shall be securely attached to a solid foundation in such a way that proper pump and driver shaft alignment will be ensured."
R/ Matt -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Tom Duross Sent: Tuesday, October 02, 2012 7:16 PM To: [email protected] Subject: RE: Fire Pump on vibration spring type isolators It was the thirty minute run once a week from an engine that was the concern. -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Dave Phelan Sent: Tuesday, October 02, 2012 2:27 PM To: [email protected] Subject: RE: Fire Pump on vibration spring type isolators I'm grasping the idea of wanting to prevention the transmission of vibration and such when the pump is mounted above an occupied floor, particularly in a residential building, although I'm thinking there isn't a catcher's mitt big enough for the pieces which will be bouncing off the IBC required FRR pump room enclosure..... So if the pump is running and fire protection water is moving why am I concerned about vibration??? If the place is on fire there's going to be a lot more noise and chaos to drown the pump out. Are we that concerned over periodic churn tests? It can't be any worse than slamming self closing doors in a vinyl tiled concrete corridor 24/7. If anyone does a test or mock up of this revolutionary concept please video it so we can all enjoy. Dave Phelan _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum
