Threads are different so they are getting shipped back. Thanks for the help.
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Todd - Work Sent: Thursday, October 31, 2013 10:18 AM To: [email protected] Subject: Re: METRIC HEADS You might want to verify that the K115 will work on that system. Todd G Williams, PE Fire Protection Design/Consulting Stonington, CT www.fpdc.com > On Oct 31, 2013, at 10:27 AM, "Martinez, Dewayne" <[email protected]> wrote: > > We have received some metric heads on a job and I was wondering if > they were all right to use here? The k factor is listed as 115 > instead of 8.0. Never had this happen before. > > Thanks, > > > > Dewayne Martinez > > Fire Protection Design Manager > > Total Mechanical > > 414-406-5208 (c) 262-522-7110 (w) 262-522-1006 (f) > > > > _______________________________________________ > Sprinklerforum mailing list > [email protected] > http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkl > er.org _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler .org _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org
