Correction- r is the impeller radius in feet, and if there are any sprinks out 
there ever willing to check this out by looking at any shop certified pump 
curves I think you 

> On Jul 12, 2014, at 4:27 PM, Brad Casterline <[email protected]> wrote:
> 
> 
> 
>> On Jul 12, 2014, at 4:24 PM, Brad Casterline <[email protected]> wrote:
>> 
>> i.e., rated pressure = 100 psi & rated rpm = 1800. Now then, what is the 
>> impeller diameter?
>> 
>> Calc of velocity in a circle is:
>> v=2*PI*r*f, where r is the impeller diameter in feet, and f is revolutions 
>> per second, so f=1800/60=30. To solve for r we need to rearrange to 
>> r=v/2*PI*f, but what is v? Well, it is the square root of 2gh and h is 
>> 100/.433 so we end up with r=121.95/2/3.14/30=.647 feet, times 2 for 
>> diameter, times 12 for inches=15.5.
>> 
>> Not perfect, but probably closer than just guessing ;)
>> 
>> 
> _______________________________________________
> Sprinklerforum mailing list
> [email protected]
> http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org

Reply via email to