Right. We were going to make fitter jokes in my office until I pointed out that the asking of the question meant the fitter in question was engaged. So that's a start ...
Okay, okay! Sorry fitters ... SML -----Original Message----- From: Sprinklerforum [mailto:[email protected]] On Behalf Of [email protected] Sent: Tuesday, November 25, 2014 8:43 AM To: [email protected] Subject: RE: Ductile Iron Pipe This explains it! Mark at Aero -----Original Message----- From: Sprinklerforum [mailto:[email protected]] On Behalf Of Matt Grise Sent: Tuesday, November 25, 2014 7:48 AM To: [email protected] Subject: RE: Ductile Iron Pipe It was an off-hand question from one of our installers. We were reviewing chapter 10 of NFPA 13. Matt Grisé PE*, LEED AP, NICET II Sales Engineer Alliance Fire Protection 130 w 9th Ave. North Kansas City, MO 64116 *Licensed in KS & MO 913.888.0647 ph 913.888.0618 f 913.927.0222 cell www. AFPsprink.com -----Original Message----- From: Sprinklerforum [mailto:[email protected]] On Behalf Of Steve Leyton Sent: Tuesday, November 25, 2014 8:44 AM To: [email protected] Subject: RE: Ductile Iron Pipe How about: It's heavy; this translates to labor and material costs to install, support, seismically brace. It requires special equipment to fabricate and isn't friendly to field mod's like, at all. It requires flanged or mechanical joints, which are expensive and labor intensive. It's more expensive than steel and our industry will organically migrate to the cheapest material choices 99.93% of the time. I'm sure there are plenty more reasons but it makes very little sense to me ... who's asking you? SL -----Original Message----- From: Sprinklerforum [mailto:[email protected]] On Behalf Of Matt Grise Sent: Tuesday, November 25, 2014 6:27 AM To: [email protected] Subject: Ductile Iron Pipe I was asked recently why we (sprinkler people) don’t use DI pipe for above ground systems. My first thought was 1) cost 2) hard to groove/thread 3)not available in small diameters. But I have not really been able to find any info that specifically states a reason. I thought I would check with the forum before I repeated anecdotal info. Thanks! Matt Grisé PE*, LEED AP, NICET II Sales Engineer Alliance Fire Protection 130 w 9th Ave. North Kansas City, MO 64116 *Licensed in KS & MO 913.888.0647 ph 913.888.0618 f 913.927.0222 cell www. AFPsprink.com _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org
