I still say we don't need two 1" globe valvles OR any 2" pipe to make a Drum Drip. How about a 1" globe at 7' AFF, then 6' of 1" down to a 1x1/2 red. with a 1/2" fairly easily removed plug? In this way, most would-be tamperers would need a ladder and wrench, and honest workers could use the one valve and one plug to acomplish the same thing the picture of drum drips in 13 do.
Brad On Dec 14, 2015 10:40 AM, "Jay Stough" <[email protected]> wrote: > AGF has a nice setup. We recently installed one of their heated drum drips > where the installing contractor put the drum drip outside. Go to: > http://www.testandrain.com/documents/products.html#collectandrain > > *Jay Stough* > NICET IV LAYOUT > NICET III ITM > > On Mon, Dec 14, 2015 at 10:37 AM, Gregory Lindholm <[email protected]> > wrote: > > > Has anybody seen where I could get a guard that would keep people from > > tampering with drain valves I has seen something quite a few years ago, > but > > cannot find out where now. > > It does not matter if it attaches to the piping, then a lock installed on > > that, or some type of cage attached to a wall, then a door on that. > > > > Greg Lindholm > > _______________________________________________ > > Sprinklerforum mailing list > > [email protected] > > > > > http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org > > > _______________________________________________ > Sprinklerforum mailing list > [email protected] > > http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org > _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org
