I use a Supco LPT1000 LOGiT Datalogger for Pressure and Temperature to record water pressure over a time span of an hour or a week or more. I have not used the temperature feature. It does a fine job with water pressure.
Bobby McCullough [email protected] -----Original Message----- From: Sprinklerforum [mailto:[email protected]] On Behalf Of Easter, Timothy Sent: Monday, March 21, 2016 2:36 PM To: [email protected] Subject: temperature monitoring system We are required by AFB to install a temperature monitoring system to monitor wet-pipe sprinkler systems within hangars. Does anyone have any recommendations i.e. specific manufacturer? How are these installed i.e. every other branch line, or one in middle and at each corner? Feel free to contact me with any questions. Regards, Timothy Easter, P.E. Fire Protection Engineer Direct: (757) 383-6217 [email protected]<mailto:[email protected]> AECOM 11832 Rock Landing Drive Suite, 306, Newport News, Virginia 23606 www.aecom.com This e-mail and any attachments contain AECOM confidential information that may be proprietary or privileged. If you receive this message in error or are not the intended recipient, you should not retain, distribute, disclose or use any of this information and you should destroy the e-mail and any attachments or copies. _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org
