Yes. Are you asking for some one to teach you how to space/calculate the
bracing? Are you asking for material data sheet information? As Craig
stated, your question is very broad.
Travis Mack, SET
MFP Design, LLC
2508 E Lodgepole Drive
Gilbert, AZ 85298
480-505-9271
fax: 866-430-6107
email:[email protected]
http://www.mfpdesign.com
https://www.facebook.com/pages/MFP-Design-LLC/92218417692
Send large files to us via: https://www.hightail.com/u/MFPDesign
LinkedIn: https://www.linkedin.com/in/travismack
On 3/16/2017 1:29 PM, [email protected] wrote:
That’s a real broad question.What kind of information?
*Craig L. Prahl**
*Fire Protection Group Lead/SME
*CH2M*
200 Verdae Blvd.
Greenville, SC 29607
Direct - 864.920.7540
Fax - 864.920.7129
CH2MHILL Extension77540
[email protected]
*From:*Sprinklerforum
[mailto:[email protected]
<mailto:[email protected]>] *On
Behalf Of *Mel Herrell
*Sent:* Thursday, March 16, 2017 3:17 PM
*To:* [email protected]
<mailto:[email protected]>
*Subject:* Information
Where may I get some information on Seismic for sprinklers?
Best regards
Melvin
_______________________________________________
Sprinklerforum mailing list
[email protected]
<mailto:[email protected]>
http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org