This is obviously outside of our scope and I am punting this back up the
chain. But, has anyone that is sprinklering these MJ facilties run into
this:
"Provide a letter from a state licensed PE or Consulting Firm approved
by the City of XXXXXXX, that supports the fire sprinkler design
assumptions. The letter shall be signed (wet) and address the design
assumptions that includes the use of CO2 enrichment, flammable
liquids/gasses, and hazardous waste and the impact that includes the
overall Heat Release Rate (HRR) and the ability of the fire sprinkler
system to suppress a fire. Reference 2016 state fire code section xxx.x.x"
I used xxx to block out any reference to the particular project.
Any ideas on this stuff. We were hired to just design the system per
OH2. This is going to get interesting.
--
Travis Mack, SET
MFP Design, LLC
2508 E Lodgepole Drive
Gilbert, AZ 85298
480-505-9271
fax: 866-430-6107
email:[email protected]
http://www.mfpdesign.com
https://www.facebook.com/pages/MFP-Design-LLC/92218417692
Send large files to us via: https://www.hightail.com/u/MFPDesign
LinkedIn: https://www.linkedin.com/in/travismack
---
This email has been checked for viruses by AVG.
http://www.avg.com
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org
