Peter,

By 2019 ed. I assume you mean NEC?

Best.

Bruce Verhei 


> On Feb 2, 2018, at 11:20, Matthew J Willis <ma...@rapidfireinc.com> wrote:
> 
> Or.., what if it's the panel on fire??
> 
> Sent from my Verizon 4G LTE Droid
> On Feb 2, 2018 12:05 PM, Michael Goodis <m...@keyfps.com> wrote:
> I have to agree with Matt here.  If it is with-in 18” below the sprinklers it 
> is considered an obstruction, if it is just under the piping, it does not 
> allow for the water pattern to properly form to cover the room as the 
> sprinklers are designed.
>  
> Regards,
>  
> Michael Goodis    
> Salesman, Project Manager
> IL#000635   NICET#135586
> Key Fire Protection Enterprises LLC
> 3200 Mike Padgett HWY
> Augusta, GA 30906
> Office- (706)790-3473
> Cell- (706) 220-8822
> Fax: (706) 738-2119
>  
>  
>  
> From: Sprinklerforum [mailto:sprinklerforum-boun...@lists.firesprinkler.org] 
> On Behalf Of Matthew J Willis
> Sent: Friday, February 2, 2018 1:40 PM
> To: Forum <sprinklerforum@lists.firesprinkler.org>; b...@firebyknight.com
> Subject: Re: Shield for electrical equipment
>  
> I still sleeve pipe because I disagree with the shield allowance. To me it is 
> an obstruction
> For your case, I would defer that to electrical folks as we do not know their 
> requirements per se.
> R
> Matt
>  
> Sent from my Verizon 4G LTE Droid
> On Feb 2, 2018 11:36 AM, Bob <b...@firebyknight.com> wrote:
> Has anyone installed a hood/ shield for electrical equipment?  Can this be 
> something as simple as a sheet metal pan that covers the width and depth?
> Suggestions, pictures, or name calling would be appreciated.
>  
>  
> Thank you,
>  
> Bob Knight, CET III
> 208-318-3057
> 
>  
> _______________________________________________
> Sprinklerforum mailing list
> Sprinklerforum@lists.firesprinkler.org
> http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org
_______________________________________________
Sprinklerforum mailing list
Sprinklerforum@lists.firesprinkler.org
http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org

Reply via email to