I’d also be concerned with heads being loaded. Slow, but hard to observe.

Maybe in a modern plant with adequate exhaust this isn’t a problem.

EH2.

Best.

Bruce Verhei 

> On Feb 22, 2018, at 06:35, John Irwin <john.ir...@dynafire.com> wrote:
> 
> Thanks Craig
> 
> John Irwin
> DynaFire Inc.
> 
> -----Original Message-----
> From: Sprinklerforum [mailto:sprinklerforum-boun...@lists.firesprinkler.org]
> On Behalf Of Prahl, Craig/GVL
> Sent: Thursday, February 22, 2018 9:29 AM
> To: sprinklerforum@lists.firesprinkler.org
> Subject: RE: Boats
> 
> In addition to resin storage and spraying, also look for releasing agents
> and solvent storage.  Typically acetone is used for cleaning equipment.  You
> might find MEK as well.
> 
> Are the hulls stored outside or on cantilever racks or inside during
> different stages of finishing and finally once completed?
> 
> You may also have exhaust system ductwork and hoods in some areas that need
> to be protected.
> 
> Typically EHII covers most of the operation.  Storage methodology of the
> hulls may drive some storage criteria.  Depending on the location of,
> quantity and type of solvents, foam-water systems might also be warranted.
> 
> The fiberglass itself won't burn, at high temps it melts.  But in some
> cases, other materials are added to the fiberglass for strength or
> resiliency that can alter the combustible nature of the product.  It's the
> composite materials that can bite you.  Ask what is in the process to be
> sure of no surprises.
> 
> Also ask for a chemical list if you can, also to be sure you don't have any
> unique, unexpected hazards that need special attention.
> 
> 
> Craig L. Prahl
> Fire Protection Group Lead/SME
> Direct - 864.920.7540
> Fax - 864.920.7129
> Direct Extension  77540
> CH2M is now Jacobs.
> 200 Verdae Blvd.
> Greenville, SC  29607
> craig.pr...@ch2m.com
> http://www.jacobs.com
> 
> -----Original Message-----
> From: Sprinklerforum [mailto:sprinklerforum-boun...@lists.firesprinkler.org]
> On Behalf Of Matt Grise
> Sent: Thursday, February 22, 2018 7:31 AM
> To: sprinklerforum@lists.firesprinkler.org
> Subject: RE: Boats [EXTERNAL]
> 
> I have visited a couple - watch out for resin storage. I don't know if the
> actual fiberglass is flammable, but the goo they put on it is. The places I
> visited also had lots of Styrofoam that was used to fill hull cavities.
> 
> Matt
> 
> 
> -----Original Message-----
> From: Sprinklerforum [mailto:sprinklerforum-boun...@lists.firesprinkler.org]
> On Behalf Of John Irwin
> Sent: Thursday, February 22, 2018 6:26 AM
> To: sprinklerforum@lists.firesprinkler.org
> Subject: Boats
> 
> [This message was identified as a phishing scam. Learn about phishing at
> http://aka.ms/LearnAboutPhishing]
> 
> I know boat storage is a bad word … how about boat production?
> 
> 
> 
> I’m looking at a 40,000sqft production building. I am guessing fiberglass
> molds and fit outs going on in these bays. Other than that there is a couple
> small offices and a small varnish room.
> 
> 
> 
> Anyone protect a building like this before?
> 
> 
> 
> John Irwin
> 
> Fire Sprinkler Specialist
> 
> DynaFire, Inc.
> 
> 727-282-9243 – Cell
> 
> 
> 
> *“A customer is the most important visitor on our premises. He is not
> dependent on us. We are dependent on him. He is not an interruption on our
> work. He is the purpose of it. He is not an outsider on our business. He is
> a part of it. We are not doing him a favour by serving him. He is doing us a
> favour by giving us an opportunity to do so.”*
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> <http://lists.firesprinkler.org/private.cgi/sprinklerforum-firesprinkler.org/attachments/20180222/80d25bb9/attachment.html>
> _______________________________________________
> Sprinklerforum mailing list
> Sprinklerforum@lists.firesprinkler.org
> http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org
> _______________________________________________
> Sprinklerforum mailing list
> Sprinklerforum@lists.firesprinkler.org
> http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org
> _______________________________________________
> Sprinklerforum mailing list
> Sprinklerforum@lists.firesprinkler.org
> http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org
> _______________________________________________
> Sprinklerforum mailing list
> Sprinklerforum@lists.firesprinkler.org
> http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org

_______________________________________________
Sprinklerforum mailing list
Sprinklerforum@lists.firesprinkler.org
http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org

Reply via email to