I’ve never seen anything but we have had inspector’s misinterpret the prohibition for supporting anything from sprinkler pipe to mean touching…never seen this one though.
Greg McGahan Genesis Fire Services, LLC o-850-637-8535 From: Sprinklerforum <[email protected]> On Behalf Of Travis Mack via Sprinklerforum Sent: Wednesday, January 15, 2020 7:54 AM To: <[email protected]> <[email protected]> Cc: Travis Mack <[email protected]> Subject: Pipe adjacent to duct We have a project where the fire inspector is stating that the fire sprinkler main is too close to ductwork. There is a 6” main that is about 1/2” from the ductwork. Of course, the inspectors response is “it’s in the code book” when asking for a reference that mandates clearance to hvac ductwork. Has anyone run into something similar? Note: this is not a high temp duct that would cause for enough heat to convert the sprinkler water to steam. This is just your standard, run of the mill, HVAC system. Travis Mack, CFPS, CWBSP, RME-G, SET 480-505-9271 x700 MFP Design, LLC www.mfpdesign,com <http://www.mfpdesign,com> Send large files to MFP Design via: https://www.hightail.com/u/MFPDesign Sent from my iPhone
_______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org
