No, 13. Talco informed me that their pumps are not listed. Their residential pump assemblies utilize listed pumps, but the assemblies are not listed per UL / FM and NFPA 20. I think it's because they use limited service controllers (?) At least that's what they told me if I understood them and recall correctly.
Steve Leyton (Sent from my smartphone; please excuse typos and voice-to-text corruptions.) -------- Original message -------- From: [email protected] Date: 4/13/23 5:08 AM (GMT-08:00) To: [email protected] Subject: [Sprinklerforum] Re: Smallest footprint pump assembly I am assuming this is 13R, so a listed pump per 20? As Richard mentioned, the Talco pumps are a good resource. At 7.5hp 50gpm @ 60psi, I found this one. https://talcofire.com/wp-content/uploads/2022/12/13-ULV50-Ra.pdf R/ Matt Please rate our customer service<https://survey.medallia.com/?emailsignature&fc=3539&bg=Fire%20and%20Fabrication> Matthew J. Willis, CWBSP, CET Engineering Designer IV FERGUSON FIRE DESIGN, LLC A Wholly Owned Subsidiary of Ferguson Fire & Fabrication, LLC 401 N 5th Street Suite 448 Wausau, WI 54403 C: 307-236-8249 [email protected]<mailto:[email protected]> www.FergusonFire.com<http://www.fergusonfire.com/> From: Richard Carr <[email protected]> Sent: Thursday, April 13, 2023 5:44 AM To: Discussion list on issues relating to automatic fire sprinklers <[email protected]> Subject: [Sprinklerforum] Re: Smallest footprint pump assembly Have you looked at Talco.com pumps? Richard M. Carr, SET Project Manager/Design Diboco Fire Sprinklers, Inc. 325 Jackson Loop Road Flat Rock, NC 28731 [email protected]<mailto:[email protected]> 828-696-3400 828-696-2288 Fax 828-708-9118 Mobile From: Steve Leyton <[email protected]<mailto:[email protected]>> Sent: Wednesday, April 12, 2023 7:19 PM To: [email protected]<mailto:[email protected]> Subject: [Sprinklerforum] Smallest footprint pump assembly Seeking the very smallest footprint list fire pump possible, as we have only a 4 residential sprinkler/light hazard demand and don’t need a big boost in pressure. Project is a tiny 4 story on a single inner city lot, and wasn’t conceived with a pump, so space is at an absolute premium Smallest one I’ve found so far is a 7.5hp in-line vertical rated 150 gpm @40 psi. Anyone have a baby pump set in their back pocket? [cid:[email protected]] Steve Leyton, President T | 619.255.8964 x 102 | www.protectiondesign.com<http://www.protectiondesign.com/> 2851 Camino Del Rio South | Suite 210 | San Diego, CA 92108 Fire Protection System Design | Consulting | Planning | Training
_________________________________________________________ SprinklerForum mailing list: https://lists.firesprinkler.org/list/sprinklerforum.lists.firesprinkler.org To unsubscribe send an email to [email protected]
