Looks like it's out of release candidate and stable now: https://bitbucket.org/spyder-ide/spyderlib/downloads/spyder-2.3.0.zip
On Saturday, February 15, 2014 1:57:43 PM UTC-7, ufechner wrote: > > Hello, > I forgot the following command: > > sudo apt-get install python3-dev > > Uwe > > On Saturday, February 15, 2014 9:50:39 PM UTC+1, ufechner wrote: >> >> Hello, >> >> I was successfully installing Spyder with Python 3.3 on Ubuntu 13.10 >> in the following way: >> >> sudo apt-get install python3 >> sudo apt-get install python3-pip >> sudo apt-get install ipython3 >> sudo apt-get install ipython3-qtconsole >> sudo pip3 install -U numpy >> sudo apt-get build-dep python-scipy >> sudo pip3 install -U scipy >> sudo pip3 install -U matplotlib >> >> sudo pip3 install pep8 >> sudo pip3 install pyflakes >> sudo pip3 install sphinx >> sudo pip3 install rope_py3k >> >> cd ~ >> mkdir 00Software >> cd 00Software >> wget >> https://bitbucket.org/spyder-ide/spyderlib/downloads/spyder-2.3.0beta3.zip >> unzip spyder-2.3.0beta3.zip >> cd spyder-2.3.0beta3 >> python3 setup.py build >> sudo python3 setup.py install >> >> Please add to the documentation that the name of the rope package that is >> needed >> here is rope_py3k. It took me some time to figure that out. >> >> >> Best regards: >> >> Uwe Fechner >> > -- You received this message because you are subscribed to the Google Groups "spyder" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/spyderlib. For more options, visit https://groups.google.com/d/optout.
